You can only create new pay components or allowances in Additions and Deductions. Additions and Deductions fall into one of five categories:
An addition before tax, added to the gross pay, before the calculation of tax.
A deduction before tax, subtracted from the gross pay, before the calculation of tax.
An addition after tax, added to the net pay, after the calculation of tax.
A deduction after tax, subtracted from the net pay, after the calculation of tax.
A tax adjustment, changes the tax withheld.
Some fields cannot be changed once the addition or deduction has been created. These will be greyed out when editing. They include code, category and type. If the category or type is incorrect, create a new addition or deduction.
Each addition or deduction is itemised on the employee's pay advice and recorded as an individual item within the payroll record. Therefore, the additions and deductions lists used to process pays must be finalised before a pay run commences.
The Australian Tax Office (ATO) requires some additions and deductions to be shown separately in STP Reporting. See the ATO's Quick Reference Guide for more information on reporting groups.
There are four types of Additions and Deductions that you can create. They are:
Amount - used to pay or deduct a fixed amount, e.g. phone allowance, salary sacrifice.
Percent - used to pay an additional percent based either on hours worked, e.g. casual loading or on hours entered in a transaction, e.g. public holiday worked or overtime at time and a quarter.
Rate - used to pay an amount based either on hours worked, e.g. higher duties or site allowance or on hours entered in a transaction, e.g. shift allowance.
Unit - used to pay an amount per occurrence, e.g. kilometer allowance or meal allowance.
Refer to the steps below for the type you want to create.
Amount based
Amount based additions are used to pay or deduct based on a fixed amount per pay period. Examples include bonus, commission, phone allowance and super deductions for a fixed amount.
To create the addition:
Click General (
), then select Additions & Deductions.Click Add. The Add new Addition / Deduction dialog opens.
Enter a Code. This is alpha number and must be unique.
Enter a Description. This is the name displayed in reports and on pay advices.
Enter a Shortcut Key. This is used for quick entry and must be a unique three character code.
Choose a Category. The options are Addition Before Tax, Addition After Tax, Deduction Before Tax, Deduction After Tax, Tax Adjustment.
Select Amount as the Type.
Enter an Amount if all employees will receive the same amount. You can leave this blank if it is different for each employee.
Select Include in deduction calculation if you want the amount included in percent based deduction, e.g. if you want to include a bonus in a super salary sacrifice.
Select Include in Loading if you want to include the amount the calculation of a percentage based additions, e.g. casual loading.
Select Employee contribution if the deduction is an employee super contribution. This field is only available if the Category is Deduction Before Tax or Deduction After Tax.
Select Reducing Balance if there is a maximum amount to pay or deduct, e.g. company loan repayment.
If all amounts for the amount should be allocated to the same Cost Account, select a Cost Account
Click the STP reporting tab.
Select the Reporting group, Reporting subgroup and, if required, Other allowance description.
Select Qualifying Earnings (QE) to include the value in the QE reported via STP Reporting.
Click Add Addition / Deduction.
Percent based
Percent based additions are used to pay or deduct based on a percent of a rate per hour. Examples include casual loading, overtime at a different percent, public holiday worked and super deductions based on a percent.
The hours used in the calculation can either be based on other hours, e.g. normal, leave, etc. or can be entered for the addition in the transaction.
To create the addition:
Click General (
), then select Additions & Deductions.Click Add. The Add new Addition / Deduction dialog opens.
Enter a Code. This is alpha number and must be unique.
Enter a Description. This is the name displayed in reports and on pay advices.
Enter a Shortcut Key. This is used for quick entry and must be a unique three character code.
Choose a Category. The options are Addition Before Tax, Addition After Tax, Deduction Before Tax, Deduction After Tax, Tax Adjustment.
Select Percent as the Type.
Enter a Percentage if all employees will receive the same percent. You can leave this blank if it is different for each employee.
Either select:
Specify Hours in Transaction. Use this to enter the hours in the transaction. When selected Hours Type is greyed out.
the components the addition or deduction is calculated on under Hours Type.
If you select Time and a Half Hours, Double Hours or Penalty Hours at Hours Type, you need to select the Overtime Type. There are three options:
Actual - this uses the actual hours worked. The calculation will be a percentage of the overtime hours x rate.
Paid - this uses the paid amount. The calculation will be a percentage of the overtime hours x rate x the overtime factor, e.g. 1.5 for time and a half.
Premium - this is the difference between actual and paid. The calculation will be a percentage of the overtime hours x rate x (overtime factor -1), e.g 1.5 -1 = 0.5 for time and a half.
Select the Rate type.
If you select Other Leave at Hours Type, you need to select which Other Leave Reasons to include.
If you select User Defined Leave at Hours Type, you need to select which User Defined Leave to include.
Under Deduction Options:
Select Include in deduction calculation if you want the amount included in percent based deduction, e.g. if you want to this in a super salary sacrifice.
If the Category is either Deduction Before Tax or Deduction After Tax, you can select Process deduction calculation. This will include any addition or deduction that has Include in deduction calculation selected in the calculation.
Under Loading:
Select Include in Loading if you want to include the amount the calculation of a percentage based additions, e.g. casual loading.
If the Category is either Addition Before Tax or Addition After Tax, you can select Process Loading. This will include any addition or deduction that has Include in loading selected in the calculation.
Select Employee contribution if the deduction is an employee super contribution. This field is only available if the Category is Deduction Before Tax or Deduction After Tax.
Select Reducing Balance if there is a maximum amount to pay or deduct, e.g. company loan repayment.
Select Apply costing split if you want to split the value between the cost accounts used for the selected Hour Types. This option isn't available if you have Specify in transaction selected.
If all amounts for the amount should be allocated to the same Cost Account, select a Cost Account
Click the STP reporting tab.
Select the Reporting group, Reporting subgroup and, if required, Other allowance description.
Select Qualifying Earnings (QE) to include the value in the QE reported via STP Reporting.
Click Add Addition / Deduction.
Rate based
Rate based additions are used to pay or deduct based on a fixed rate per hour. Examples include site allowance, higher duties, and shift loading.
The hours used in the calculation can either be based on other hours, e.g. normal, leave, etc. or can be entered for the addition in the transaction.
To create the addition:
Click General (
), then select Additions & Deductions.Click Add. The Add new Addition / Deduction dialog opens.
Enter a Code. This is alpha number and must be unique.
Enter a Description. This is the name displayed in reports and on pay advices.
Enter a Shortcut Key. This is used for quick entry and must be a unique three character code.
Choose a Category. The options are Addition Before Tax, Addition After Tax, Deduction Before Tax, Deduction After Tax, Tax Adjustment.
Select Rate as the Type.
Enter a Rate if all employees will receive the same rate. You can leave this blank if it is different for each employee. The rate is the dollar amount you want to pay per hour.
Either select:
Specify Hours in Transaction. Use this to enter the hours in the transaction. When selected Hours Type is greyed out.
the components the addition or deduction is calculated on under Hours Type.
If you select Time and a Half Hours, Double Hours or Penalty Hours at Hours Type, you need to select the Overtime Type. There are three options:
Actual - this uses the actual hours worked. The calculation will be a percentage of the overtime hours x rate.
Paid - this uses the paid amount. The calculation will be a percentage of the overtime hours x rate x the overtime factor, e.g. 1.5 for time and a half.
Premium - this is the difference between actual and paid. The calculation will be a percentage of the overtime hours x rate x (overtime factor -1), e.g 1.5 -1 = 0.5 for time and a half.
If you select Other Leave at Hours Type, you need to select which Other Leave Reasons to include.
If you select User Defined Leave at Hours Type, you need to select which User Defined Leave to include.
Under Deduction Options:
Select Include in deduction calculation if you want the amount included in percent based deduction, e.g. if you want to this in a super salary sacrifice.
Under Loading:
Select Include in Loading if you want to include the amount the calculation of a percentage based additions, e.g. casual loading.
Select Employee contribution if the deduction is an employee super contribution. This field is only available if the Category is Deduction Before Tax or Deduction After Tax.
Select Reducing Balance if there is a maximum amount to pay or deduct, e.g. company loan repayment.
Select Apply costing split if you want to split the value between the cost accounts used for the selected Hour Types. This option isn't available if you have Specify in transaction selected.
If all amounts for the amount should be allocated to the same Cost Account, select a Cost Account
Click the STP reporting tab.
Select the Reporting group, Reporting subgroup and, if required, Other allowance description.
Select Qualifying Earnings (QE) to include the value in the QE reported via STP Reporting.
Click Add Addition / Deduction.
Unit based
Unit based additions are used to pay or deduct based on a fixed rate per unit. Examples include kilometer allowance, piecemeal allowance, and meal allowance.
You enter the number of unit for the addition in the transaction.
To create the addition:
Click General (
), then select Additions & Deductions.Click Add. The Add new Addition / Deduction dialog opens.
Enter a Code. This is alpha number and must be unique.
Enter a Description. This is the name displayed in reports and on pay advices.
Enter a Shortcut Key. This is used for quick entry and must be a unique three character code.
Choose a Category. The options are Addition Before Tax, Addition After Tax, Deduction Before Tax, Deduction After Tax, Tax Adjustment.
Select Unit as the Type.
Enter a Unit value if all employees will receive the same rate. You can leave this blank if it is different for each employee. The value is the dollar amount you want to pay per unit.
Enter a Unit description.
Under Deduction Options:
Select Include in deduction calculation if you want the amount included in percent based deduction, e.g. if you want to this in a super salary sacrifice.
Under Loading:
Select Include in Loading if you want to include the amount the calculation of a percentage based additions, e.g. casual loading.
Select Employee contribution if the deduction is an employee super contribution. This field is only available if the Category is Deduction Before Tax or Deduction After Tax.
If all amounts for the amount should be allocated to the same Cost Account, select a Cost Account
Click the STP reporting tab.
Select the Reporting group, Reporting subgroup and, if required, Other allowance description.
Select Qualifying Earnings (QE) to include the value in the QE reported via STP Reporting.
Click Add Addition / Deduction.
